Cart 0

FiiO X1 2nd Gen & Audio Technica ATH-M20x

  • Rs. 10,798.00
  • Save Rs. 140

FiiO X1 2nd Gen Music Player:-

Wireless music, played at the touch of a wheel. The new 2nd generation FiiO X1 lossless portable music player brings comprehensive improvements of performance, ergonomics and design, starting with its touch wheel. Light and portable, its aluminium alloy body is compact with a natural arc contour for comfortable hand-holding. All new UI design with theme support on a bright 2-inch LCD screen. The Bluetooth 4.0 system based on F1C81 chip set allows you to easily enjoy the music with reduced latency and high sound quality. Supports micro SD card up to 256 GB for practically endless music playback. Comprehensive improvement of hand feel starting from the touch wheel. By studying and comparing dozens of designs and through hundreds of experiments and tests, we have finally developed the unique FiiO touch wheel with higher sensitivity, better anti-interference, enhanced reliability and longer service life. Full aluminium alloy and compact design provides a better hand feel. To pursuit perfect hand feel, arc waist design is employed to provide better hand fitness and feel. Dedicated professional high quality DAC chip. Utilizes Texas instruments high quality CM5242, the all new X1 gets higher signal-to-noise ratio and supports full differential line output to achieve balanced line output function, as compared with PCM5142 of last generation. Further optimized architecture. With dedicated LPF and operational amplifier, we have optimized design of power architecture and circuit at the same time to further improve sound quality of second generation X1/ the all new X1, making better low-frequency quality and depth.

General Specifications
Model/Number X1 2nd gen / FX1221 Headphone out (PO) 3.5mm headphone output jack
Color Available Sliver/Black/Rose gold Headphone Impedance Range 16~100 Ω
Dimensions 97mm×55.5 mm×12 mm Volume control type 100 steps digital potentiometer
Weight 102 g Bass Boost N/A
Display Screen TFT 320×240 Treble N/A
Analog Audio Output Jack(LO) 3.5 mm headphone output jack Balance 5 dB
Digital Audio Output Jack N/A Gain Selection N/A
USB DAC N/A Equalizer 7-band equalizer (±6dB)
Chips used

SoC: JZ4760B ,   DAC: PCM5242,    LPF: OPA2322,    OP: ISL28291

Partial Performance Parameters for Line Output
THD+N ≤ 0.003% (1 kHz) SNR ≥115 dB  (A-weighted)
Frequency Response 5 Hz~60 kHz (-3dB) Dynamic range ≥107 dB
Crosstalk ≥ 101 dB (10 KΩ/1 kHz) Line output Level 1.7 Vrms (10 KΩ/1 kHz)
Partial Performance Parameters for Headphone Output
Output Power 1 > 100 mW (16 Ω/THD+N<1%) Output Impedance <1Ω(32Ω loaded)
Output Power 2 ≥ 70 mW (32 Ω/THD+N<1%) Crosstalk ≥72 dB (1 kHz)
Output Power 3 ≥ 8 mW (300 Ω/THD+N<1%) THD+N ≤ 0.003% (1 kHz)
Frequency Response 5 Hz~60 kHz (-3dB) MAX output voltage >4.0 Vp-p
SNR ≥113 dB (A-weighted) MAX output current >130 mA(For reference)
Power and Battery
Power Recommend DC5V 2A Battery Capacity 1800 mAh
Charge Display Red light indicates , green light turns on after fully charged Battery Display Yes
Battery Life >12 h Charging Time <3 h (DC5V 2A)
Battery Life Test Conditions


Load M3 open earbuds (27 Ω)
Volume 39 EQ OFF
Test File MP3 44.1kHz/16bit (Download link)
Audio Format Supported


APE(Fast):  192 kHz/24 bit;
APE(Normal):  96 kHz/24 bit;
APE (High): 96 kHz/24 bit;
FLAC: 192 kHz/24 bit;
WAV: 192 kHz/32 bit;
Aiff:192 kHz/32 bit;
Aif:192 kHz/24 bit;
WMA Lossless: to be supported by future update;
Apple Lossless: 192 kHz/24 bit;


Lossy compression:


Audio-Technica ATH-M20x Over-Ear Professional Studio Monitor Headphone:-

Impressive Design

If you are looking for over-ear headphones that have sturdy built and offers amazing audio quality with booming bass, then Technical ATH-M20X Professional Studio Monitor headphone can be your ideal choice. This headphone flaunts trendy looks and comes with soft ear pad cushions offering comfortable listening experience even for extended hours. It features circumaural design, which gives superb sound isolation in loud environment. The headphones are designed with copper-clad aluminum wire voice coils to improve sound quality and sensitivity of speakers. Moreover, it is made of pro-grade materials, making it durable.

Exceptional Sound output and other additional features

The Professional Studio Monitor headphone comes fitted with 40 mm neodymium drivers and rare earth magnets, which boosts sound performance. As it is tuned to enhance low frequency so it produces clean and clear sound without any distortion. The headphone also comes with 3m straight single side cable which makes it convenient for studio tracking or field recording. It requires a maximum input power of 700mW, which lets you enjoy your favourite tracks uninterruptedly. Moreover, it is compatible with a number of devices like Smartphone, laptops, desktops, and more thus you can relish high-end sound quality anytime and anywhere. Audio Technica ATH-M20X Professional Studio Monitor Headphone comes with one-year manufacturer’s warranty.

The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.

Product Features:

  • Advanced build quality and engineering
  • 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
  • Tuned for enhanced low-frequency performance
  • Circumaural design contours around the ears for excellent sound isolation in loud environments
  • Convenient single-side cable exit

Technical Specification :

Type Closed-back dynamic
Driver Diameter 40 mm
Magnet Neodymium
Voice Coil Copper-clad aluminum wire
Frequency Response 15 - 20,000 Hz
Maximum Input Power 700 mW at 1 kHz
Sensitivity 96 dB
Impedance 47 ohms
Weight 190 g (6.7 oz), without cable and connector
Cable 3.0 m (9.8'), straight, left-side exit
Accessory Included 6.3 mm (1/4") snap-on adapter

Box Contents:-

ATH-M20x : 1 Headphone || 1 removable 6.3 mm (1/4") screw-on adapter || User Guide

FiiO X1 2nd Gen :  1 Music Player || 1 Transparent back cover  || 1 Full Screen Scratch guard || 2 Theme stickers || 1 User Guide || 1 Warranty Card

We Also Recommend